Browse all guides

Docs Irrigation

Add an irrigation object to the map

Drop a sprinkler head, valve, or any other irrigation object onto your course map from the web or your phone.

Every head, valve, and controller you place becomes a point the whole crew can find, log work on, and inspect. Adding one takes about fifteen seconds: drop a pin, pick the type, and name it.

  1. Open the Irrigation section.

  2. Click the green Add to map button on the left toolbar and choose Add object. (The other choice, Report an issue, outlines a problem area instead. See Report an issue on the map.)

  3. Click the spot on the map where the object lives. Near a pipe, the pin snaps right onto it. Press Esc if you change your mind.

  4. The Set Up Irrigation Item form opens with the location locked in. If the spot is wrong, click Change and click again.

  5. Pick the type: Sprinkler Head, Valve, Quick Coupler Valve, Satellite Controller, Splice Box, Pump Station, Central Control, PRV / PVR, Flow Meter, or Water Source.

  6. Name it (something like “18 Green QCV”), and set a Hole and Area if you want the filters to find it later.

  7. Click Add To Map. It’s live for your whole team instantly.

  1. Tap the Irrigation section (droplets icon) in the bottom bar.

  2. Tap the green Add button and choose Add irrigation object (“Tap the map to place a new object.”).

  3. Tap the spot on the map, or stand next to the head and tap USE CURRENT LOCATION to place the pin at your GPS position.

  4. Tap the map to adjust the pin if needed, then tap Proceed to next step.

  5. Pick the type, name it, and optionally tap a Hole and Area chip.

  6. Tap Add to map.

Good to know

  • Name things consistently (“3 Fwy Head 12”) and the Inventory panel stays useful as your map grows.
  • Zoom in close and each item shows its name on a small chip beside its icon, on web and mobile. The selected item’s chip hides while its panel is open.
  • Holes and areas power the map filters, so tagging items now saves scrolling later.
  • Your property can have custom object types too. See Set up your objects.

If something’s not working

“Adding objects is limited to management or owners.” Your role can’t add objects. Any Owner or Management member can do it, or change your role under Manage Account → Team.

The type grid says “No irrigation icons are configured for this property.” Your icon library is empty. Reseed it from Set up your objects, or contact us.

Add To Map is grayed out. You need all three: a location, a type, and a name.